Paint sealing – now that the paints prepared properly underneath its time to do the final clean and the seal it.

Paint Sealing kit for the ultimate shine using the revolutionary Glassplexin.

The Pre Cleaner is a revolutionary micro compound developed with our exclusive Glassplexin formulation and has the smallest and finest abrasive particles added to remove light to moderate levels of oxidation and micro scratches without scratching or harming the applied surface. Its best used to remove the last traces of GLARE KNOCKOUT before sealing the paint.

GLARE polish contains GlassPlexin, exclusively formulated to polish, seal and protect your car’s paint finish in one application; this product forms a rock hard clear finish.

Kit contains

  • Pre Cleaner
  • GLARE Polish
  • 2 applicator pads
  • 1 large micro fibre cloth
  • 1 small final finish micro fibre cloth

Step 1 – Pre-Clean

Use the Pre- Cleaner on the entire surfaces of your vehicle. Take an application sponge and apply a small amount and work an area in circular motions. Once all the surface are covered return and use the micro fibre cloth to remove the Pre- Cleaner from your vehicle, make sure that you have completely removed all the product.

  • Car polishing service
  • Car cleaning cloth

Step 2 – Polish

Use the GLARE POLISH on all the surfaces of your vehicle. Take an application sponge and apply a small amount and work the area in circular motions.

Once all the surfaces are covered return and use the micro fibre cloth to remove the GLARE POLISH from your vehicle, make sure that you have completely removed the entire product.

Step 3 – Polish (Again)

Apply a second coat of the GLARE POLISH to ensure all areas have been covered. You can use GLARE POLISH on all surfaces including Windows and Wheels to keep that all over clean. Once all the surface are covered return and use the micro fibre cloth to remove the GLARE POLISH from your vehicle, make sure that you have completely removed all the product.

  • Automotive paint protection
  • Sydney car polish
  • Car polishing service

Machine application

Both the Pre- Cleaner and GLARE POLISH can be applied using a random orbital polisher that can be found at most hardware stores. You cannot damage your paint surface using a random orbital and if you have one available it is best to purchase your required polishing pads from us to give you that professional finish in half the time.

Make sure you keep the pad damp (with product-not water) when using either the Pre Cleaner or GLARE POLISH products.

Apply Product to foam polishing pad and buff to shine, do not exceed 2000 RPM and wipe off excess product with microfibre cloth.

  • Polishing machine
  • Car cleaning cloth