Paint rectification kit – the most important step, its pointless sealing the paint with any product if you haven’t prepared it properly underneath.
GLARE ZERO is a revolutionary product that chemically softens the surface of the clear-coat when activated by heat from friction during hand application or by random orbital buffer. The surface of the clear-coat turns into semi-fluid state allowing the scuffs and scrapes to blend together.
GLARE KNOCKOUT is the most aggressive product in the range and is designed to remove and repair the heaviest levels of oxidation and scratches in a safe and effective manner through advanced chemical means. It has been designed to be as aggressive as possible without being overly abrasive. KNOCKOUT will not only remove and reverse oxidation, but will also remove stains and repair damage like bird dropping stains and hard water spot damage.
Kit Contains
- GLARE ZERO
- GLARE KNOCKOUT
- 2 applicator pads
- 1 large microfibre cloth
- 1 small microfibre cloth
Step 1
Use the GLARE ZERO on the top facing surfaces of your vehicle. Take an application sponge and apply a small amount and work an area in circular motions. Once all the surface are covered return and use the micro fibre cloth to remove the GLARE ZERO from your vehicle, make sure that you have completely removed all the product.
Step 2
Use the GLARE KNOCKOUT on all the top facing surfaces of your vehicle. Take an application sponge and apply a small amount and work the area in circular motions.
Once all the surfaces are covered return and use the micro fibre cloth to remove the GLARE KNOCKOUT from your vehicle, make sure that you have completely removed all the product.
Machine application
Both the GLARE ZERO and GLARE KNOCKOUT can be applied using a random orbital polisher that can be found at most hardware stores. You cannot damage your paint surface using a random orbital and if you have one available it is best to purchase your required polishing pads from Auto Obsession to give you that professional finish in half the time.
Make sure you keep the pad damp (NOT water) with product when using either the GLARE ZERO or GLARE KNOCKOUT.
Apply Product to foam polishing pad and buff to shine, do not exceed 2000 RPM and wipe off excess product with microfibre cloth.
